LS333 Uplight Luminaire / Wallmount

	L S 3 3 3
	UPLIGHT/WALLMOUNT	_( I P 6 8 )

i n g r o u n d _ | _ w a l l m o u n t

The In-ground Stainless Steel Range incorporates quality and innovation in materials, manufacture and finishes: from robotic fusion welded marine grade 316 stainless steel housings through to the IP68 rating achieved by its dynamic, high temperature silicone cover seal with memory additives.

Source

12volt, MR16 (20watt max)

Features

Ingress protection rating - IP68
Suitable for wet locations

OptiClear™ max static load - 4070lb (1850kg)
Applied to a 2in (51mm) diameter area in the center of the glass

Corrosion resistant 316 stainless steel - marine grade

Toughened lens

Non-galling clinch nuts dramatically reduce cross threading or binding

Self resetting thermal protection device to protect unit from overheating

Corrosion resistant stainless steel cover fasteners

Internal honeycomb louver

Options

Recessed, round flush and square flush covers

Installation

LS333A Direct burial (remote transformer)
- Wallmount
- Groundmount (suitable for light vehicular traffic)
Remote transformer sold separately – consult factory for details

LS333AN Niche / Concrete blockout (remote transformer)
- Wallmount
- Groundmount
Remote transformer sold separately – consult factory for details

LS333ANI Niche / Concrete blockout with integral transformer
- Wallmount
- Groundmount

Accessories

Wall covers
- LS629 Round
- LS628 Square

LS643 Dichroic color filters