Click Fraud Protection

At Grade LS362LED

LS362LED

The LS362LED is the ideal luminaire for locations where an uplighting effect is desired yet a flush ingrade luminaire may not be appropriate. The LS362 LED is stanchion-mounted, and therefore stays up to 2′ above grade whilst the stanchion securely holds the luminaire in place. A special tool is required to remove the luminaire from the stanchion, ensuring security and integrity of the installation, even in public spaces.

Specifications

Lamp Source16 W or 20 W LED


White (4 300 K typical)


Warm white (3 000 K typical)


Blue (470 nm)
Approved UseSuitable for wet locations


Suitable for use in poured concrete
Lumen Maintenance
(L70)
>60,000 hrs


Limited by TM-21 x6 rule
Control Options0-10 V (current sourcing)
IP RatingIP68
Construction316 marine grade stainless steel
Impact RatingIK10 with OptiClear™ lens
Standard InclusionsTeflon coated cover screws


MicroAntiLeach™ wire entry
AccessoriesLSP002 luminaire removal tool


LS646 cross hatch louver


(No LED adjustment / tilt available when using this accessory. Cannot be used with 14° (NR) Optical System.)
Ambient Operating Temperature-22 °F to 122 °F (-30 °C to +50 °C)
Surface Temperature≤113 °F (45 °C)
PhotometricsRefer to IES Files

Any luminaire can become hot – take care with appropriate use and placement.