Ingrade LS363LED

Ingrade LS363LED

The Ingrade LS363LED is a robust, medium-wattage ingrade luminaire, featuring high-efficacy Lumileds™ LEDs. As an inherently protected luminaire it can be used in interior spaces and immediately adjacent to combustible materials (such as wood decking, etc). In addition, internal rotation and tilt adjustability ensures the most efficient light delivery can be set according to the site conditions.


Lamp Source

15 W 16 LED
White (4 300 K typical)
Warm white (3 000 K typical)
Blue (470 nm)

Other colors by request

Approved SourceSuitable for wet locations

Suitable for use in poured concrete

Inherently protected
Lumen Maintenance (L70)>60,000 hrs
Limited by TM-21 x6 rule
IP RatingIP68
Construction316 marine grade stainless steel
Installation TypesPre-Installation Blockout
Concrete pour, drive-over & general use applications

Direct Burial
Landscapes, planters & special applications (consult factory)
Drive-overWith OptiClear™ lens and pre-installation blockout
(LS644-K or LS644-K-SP)
Static Load Rating6 600 lb (3 000 kg) with OptiClear™ lens and pre-installation blockout
(Load applied to center of glass across a 2″ diameter area)
Impact RatingIK9 with OptiClear™ lens
Standard InclusionsTeflon coated cover screws
MicroAntiLeach™ wire entry
Ambient Operating Temperature-22 °F to 122 °F (-30 °C to +50 °C)
Order Separately
LS644-K/LS644-K-SP Pre-installation blockout
LS646 cross hatch louver
(No LED adjustment / tilt available when using this accessory. Cannot be used with 14° (NR) Optical System.)
PhotometricsRefer to IES Files
Surface Temperature≤113 °F (45 °C)

Any luminaire can become hot – take care with appropriate use and placement.